9MM THREADED BARREL
Firstly, 9mm Threaded barrel for the Canik TP9SFX 9mm pistols. Secondly, Shoot your Canik Suppressed. Thirdly, We are the exclusive distributor of these barrels. Further, WILL ONLY FIT THE CANIK TP9SFX AND TP9SFL, NOT THE TP9SA, TP9V2 OR THE TP9SF.
- Compatible with the TP9SA Mod.2, TP9SF and TP9SFT pistols
- Tenifer Finish
- Barrel length: 5″
- 1/2×28″ threaded.
- Please note that you will need a Neilsen booster for suppressor use. This can be purchased from your suppressor manufacturer
- ***DOES NOT FIT TP9SA/TP9SFX***
Canik 9mm Threaded Barrel
This barrel will NOT work with the new Canik Mete SFX. This barrel does not have a groove to accommodate the Mete TP9 SFX’s loaded chamber indicator mechanism. We’ve added a photo of the indicator in action in the product photos so you can see this.
Firstly, Each barrel is finely & painstakingly made from ordnance grade steel. Secondly, heat treated & finished inside & out in the ultra- desirable “nitride” finish. Thirdly, This is the finest threaded barrel available for the Canik TP9SFX 9mm pistol. Further, The perfect barrel for use as a spare or for adding muzzle devices such as sound suppressors. Moreover, Each RCM Canik Tactical barrel is a drop in replacement for your Canik TP9SFX pistol)
•Fits Only the TP9SFX 9mm model(This will not fit the TP9SA, TP9SF or TP9V2, We have separate barrels for those models)
•Tactical threaded barrel threaded 1/2 X 28 US – common thread pitch so fits most suppressors without the need for an adapter.
•Each barrel includes the thread protector ($30 value)
•Traditional button rifled bore for use with jacketed and non-jacketed ammunition
•1:10 right hand twist
•4140 stress relieved & properly heat treated steel
•Micro polished feed ramp
•Machined to exact tolerances for proper fitment
•Overall length 5.8″
•Finished inside and out in the “Nitride” process for enhanced service life
•Traditional land and groove rifling
NOTE: If you are having trouble with the slide, try pressing down on the takedown tabs when you rack the slide back on. Once the slide is on, you may need to rack the slide a few times to loosen it up.
Due to the tight tolerances associated with RCM barrels and large variations in Canik slides, fitting may be required. We see this on about 5% of Caniks. Prepper Gun Shop is able to provide fitting services free of charge. We will need the slide and both barrels shipped to our location. Please contact us at firstname.lastname@example.org for additional information.
•100% made in the U.S.A.